TP-Link TL-SL5428E - show lldp neighbor-information interface; show lldp traffic interface

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
293
Gzcorng"
Display the LLDP information of Fast Ethernet port 1:
VN/UN764:G%ujqy"nnfr"nqecn/kphqtocvkqp"kpvgthceg"hcuvGvjgtpgv"1/0/1
ujqy"nnfr"pgkijdqt/kphqtocvkqp"kpvgthceg"
Fguetkrvkqp"
The ujqy" nnfr" pgkijdqt/kphqtocvkqp kpvgthceg command is used to display
the neighbor information of the corresponding port. By default, the neighbor
information of all the ports will be displayed.
U{pvcz"
ujqy" nnfr" pgkijdqt/kphqtocvkqp" kpvgthceg [hcuvGvjgtpgv" port |
ikicdkvGvjgtpgv port]
Rctcogvgt"
port —— The Fast/Gigabit Ethernet port number.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the neighbor information of Fast Ethernet port 1:
VN/UN764:G%ujqy"nnfr"pgkijdqt/kphqtocvkqp"kpvgthceg"hcuvGvjgtpgv"1/0/1
ujqy"nnfr"vtchhke"kpvgthceg"
Fguetkrvkqp"
The ujqy"nnfr"vtchhke"kpvgthceg command is used to display the LLDP statistic
information between the local device and neighbor device of the corresponding
port. By default, the LLDP statistic information of all the ports will be displayed.
U{pvcz"
ujqy"nnfr"vtchhke"kpvgthceg"[ hcuvGvjgtpgv"port | ikicdkvGvjgtpgv port ]
Rctcogvgt"
port —— The Fast/Gigabit Ethernet port number.