TP-Link TL-SL5428E - password

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
68
Enter the Virtual Terminal configuration mode so as to prepare further
configurations such as password and login mode for virtual terminal 0 to 5:
VN/UN764:G*eqphki+%nkpg"xv{"0 5
rcuuyqtf"
Fguetkrvkqp"
The" rcuuyqtf command is used to configure the connection password. To
clear the password, please use"pq"rcuuyqtf"command.
U{pvcz"
rcuuyqtf password [ugetgv {simple | cipher} ]
pq"rcuuyqtf
Rctcogvgt"
password —— Configure the connection password, which contains 16
characters at most, composing digits, English letters and under dashes only.
simple | cipher —— The way of displaying password in configuration file. By
default, it is “cipher”.
Eqoocpf"Oqfg"
Line Configuration Mode
Gzcorng"
Configure the connection password of Console port connection 0 as “tplink”:
VN/UN764:G*eqphki+%nkpg"eqpuqng 0
VN/UN764:G*eqphki/nkpg+%rcuuyqtf tplink
Configure the connection password of virtual terminal connection 0-5 as “tplink”:
VN/UN764:G*eqphki+%nkpg"xv{"0 5
VN/UN764:G*eqphki/nkpg+%rcuuyqtf tplink