VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
71
Ejcrvgt"34" Dkpfkpi"Vcdng"Eqoocpfu"
You can bind the IP address, MAC address, VLAN and the connected Port number of the Host
together, which can be the condition for the ARP Inspection and IP verify source to filter the
packets.
kr"uqwteg"dkpfkpi"
Fguetkrvkqp"
The"kr"uqwteg dkpfkpi command is used to bind the IP address, MAC address,
VLAN ID and the Port number together manually.
"You can manually bind the IP
address, MAC address, VLAN ID and the Port number together in the condition
that you have got the related information of the Hosts in the LAN. To delete the
IP-MAC –VID-PORT entry from the binding table, please use pq" kr" uqwteg"
dkpfkpi"kpfgz"command.
U{pvcz"
kr" uqwteg" dkpfkpi" hostname ip-addr mac-addr xncp" vlan-id kpvgthceg"
{ hcuvGvjgtpgv port | ikicdkvGvjgtpgv port } { none | arp-detection |
ip-verify-source | both } [ hqtegf/uqwteg {arp-scanning | dhcp-snooping} ]
pq"kr"uqwteg"dkpfkpi"kpfgz"idx
Rctcogvgt"
hostname ——The Host Name, which contains 20 characters at most.
ip-addr —— The IP address of the Host.
mac-addr —— The MAC address of the Host.
vlan-id ——The VLAN ID needed to be bound, ranging from 1 to 4094.
port —— The number of port connected to the Host.
none | arp-detection | ip-verify-source | both ——The protect type for the entry.
“arp-detection” indicates ARP detection; “ip-verify-source” indicates IP source
filter; “none” indicates applying none; “both” indicates applying both.
forced-source —— The source of the binding entry can be specified as
“arp-scanning” or “dhcp-snooping”. It is multi-optional.
idx —— The entry number needed to be deleted. You can use the ujqy " kr"
uqwteg"dkpfkpi command to get the idx. Pay attention that the entry number is
the actual number in the binding table which is not display in an arranged order.
To Next Page
Loading...
