TP-Link TL-SL5428E - name; revision

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
202
Gzcorng"
Map the VLANs 1-100 to Instance 1:"
VN/UN764:G*eqphki+%urcppkpi/vtgg"ouv"eqphkiwtcvkqp"
VN/UN764:G*eqphki/ouv+%kpuvcpeg"1"xncp"1-100
Disable Instance 1, namely remove all the mapping VLANs 1-100:"
VN/UN764:G*eqphki+%urcppkpi/vtgg"ouv"eqphkiwtcvkqp"
VN/UN764:G*eqphki/ouv+%pq"kpuvcpeg"1"
Remove VLANs 1-50 in mapping VLANs 1-100 for Instance 1:"
VN/UN764:G*eqphki+%urcppkpi/vtgg"ouv"eqphkiwtcvkqp"
VN/UN764:G*eqphki/ouv+%pq"kpuvcpeg"1"xncp"1-50
pcog"
Fguetkrvkqp"
The pcog command is used to configure the region name of MST instance.
U{pvcz"
pcog"name
Rctcogvgtu"
name —— The region name, used to identify MST region. It ranges from 1 to
32 characters.
Eqoocpf"Oqfg"
MST Configuration Mode"
Gzcorng"
Configure the region name of MST as “region1”:"
VN/UN764:G*eqphki+%urcppkpi/vtgg"ouv"eqphkiwtcvkqp"
VN/UN764:G*eqphki/ouv+%pcog"region1
tgxkukqp"
Fguetkrvkqp"
The tgxkukqp command is used to configure the revision level of MST instance.
U{pvcz"
tgxkukqp"revision