VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
43
Ejcrvgt"9" Xqkeg"XNCP"Eqoocpfu"
Voice VLANs are configured specially for voice data stream. By configuring Voice VLANs and
adding the ports with voice devices attached to voice VLANs, you can perform QoS-related
configuration for voice data, ensuring the transmission priority of voice data stream and voice
quality.
xqkeg"xncp" "
Fguetkrvkqp"
The" xqkeg" xncp" command is used to enable Voice VLAN function. To disable
Voice VLAN function, please use"pq"xqkeg"xncp"command.
U{pvcz"
xqkeg"xncp"vlan-id"
pq"xqkeg"xncp"
Rctcogvgt"
vlan-id —— Specify IEEE 802.1Q VLAN ID, ranging from 2 to 4094.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable the Voice VLAN function for VLAN 10:
VN/UN764:G*eqphki+%xqkeg"xncp"10
xqkeg"xncp"cikpi"vkog"
Fguetkrvkqp"
The xqkeg"xncp"cikpi"vkog command is used to set the aging time for a voice
VLAN. To restore to the default aging time for the Voice VLAN, please use pq"
xqkeg"xncp"cikpi"vkog command. By default, the aging time is 1440 minutes.
U{pvcz"
xqkeg"xncp"cikpi"vkog"time"
To Next Page
Loading...
