TP-Link TL-SL5428E - show ethernet-oam statistics; show ethernet-oam status

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
225
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display Ethernet OAM event log of Fast Ethernet port 2:
VN/UN764:G*eqphki+%" ujqy"gvjgtpgv/qco" gxgpv/nqi" kpvgthceg"hcuvGvjgtpgv
1/0/2
ujqy"gvjgtpgv/qco"uvcvkuvkeu"
Fguetkrvkqp"
The ujqy" gvjgtpgv/qco" uvcvkuvkeu" command is used to display the Ethernet
OAM statistics.
U{pvcz"
ujqy"gvjgtpgv/qco"uvcvkuvkeu" " ["kpvgthceg"{"fcuvGvjgtpgv"~"ikicdkvGvjgtpgv }
port"]"
Rctcogvgt"
port —— The Fast/Gigabit Ethernet port number. By default, the Ethernet OAM
statistics of all ports are displayed.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display Ethernet OAM statistics of Fast Ethernet port 2:
VN/UN764:G*eqphki+%" ujqy" gvjgtpgv/qco" uvcvkuvkeu" kpvgthceg" hcuvGvjgtpgv"
1/0/2
ujqy"gvjgtpgv/qco"uvcvwu"
Fguetkrvkqp"
The ujqy"gvjgtpgv/qco"uvcvwu"command is used to display the Ethernet OAM
status of both the local and the remote client.