TP-Link TL-SL5428E - show system-time dst; show system-time ntp; show system-info

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
143
ujqy"u{uvgo/vkog"fuv"
Fguetkrvkqp"
The ujqy" u{uvgo/vkog" fuv" command is used to display the DST time
information of the switch.
U{pvcz"
ujqy"u{uvgo/vkog"fuv"
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the DST time information of the switch
VN/UN764:G%ujqy"u{uvgo/vkog"fuv"
ujqy"u{uvgo/vkog"pvr"
Fguetkrvkqp"
The ujqy" u{uvgo/vkog" pvr" command is used to display the NTP mode
configuration information.
U{pvcz"
ujqy"u{uvgo/vkog"pvr"
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the NTP mode configuration information of the switch:
VN/UN764:G%ujqy"u{uvgo/vkog"pvr"
ujqy"u{uvgo/kphq"
Fguetkrvkqp"
The ujqy"u{uvgo/kphq"command is used to display system description, system
name, device location, system contact, hardware version, firmware version,
system time, run time and so on.