TP-Link TL-SL5428E - media-type; duplex

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
155
ogfkc/v{rg"
Fguetkrvkqp"
The"ogfkc/v{rg"command is used to configure the media type of Combo port.
For a Combo port, the media type should be configured before you set its speed
and mode.
U{pvcz"
ogfkc/v{rg { rj45 | sfp }
Rctcogvgt"
rj45 | sfp —— Media type.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Gzcorng"
Configure the media type of Combo port 28T as “SFP”:
VN/UN764:G*eqphki+% kpvgthceg"ikicdkvGvjgtpgv"1/0/28
VN/UN764:G*eqphki/kh+%"ogfkc/v{rg"sfp"
fwrngz"
Fguetkrvkqp"
The" fwrngz" command is used to configure the Duplex Mode for an Ethernet
port. To return to the default configuration, please use"pq"fwrngz"command."
U{pvcz"
fwrngz { full | half }
pq"fwrngz"
Rctcogvgt
full | half —— The duplex mode of the Ethernet port. There are two options:
full-duplex mode (default) and half-duplex mode.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Configure the Duplex Mode as full-duplex for Gigabit Ethernet port 25: