VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
280
type —— The event type, with “none”, “log”, “notify” and “both” options. “None”
indicates no processing, “log” indicates logging the event, “notify” indicates
sending trap messages to the management station, and “both” indicates logging
the event and sending trap messages to the management station.
owner-name —— The owner of the event entry, ranging from 1 to 16
characters. By default, it is “monitor”.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Configure the user name of entry 1, 2, 3 and 4 as user1, the description of the
event as “description1”, the type of event as log and the owner of the event as
“owner1”:
VN/UN764:G*eqphki+%toqp" gxgpv 1-4 wugt user1 fguetkrvkqp description1"
v{rg"log qypgt owner1
toqp"cncto" "
Fguetkrvkqp"
The toqp" cncto" command is used to configure SNMP-RMON Alarm
Management. To return to the default configuration, please use pq"toqp"cncto"
command. Alarm Group is one of the commonly used RMON Groups. RMON
alarm management allows monitoring the specific alarm variables. When the
value of a monitored variable exceeds the threshold, an alarm event is
generated, which triggers the switch to act in the set way.
U{pvcz"
toqp" cncto index kpvgthceg" {" hcuvGvjgtpgv port | ikicdkvGvjgtpgv port }
[ cncto/xctkcdng" { drop | revbyte | revpkt | bpkt | mpkt | crc-lign | undersize |
oversize | fragment | jabber | collision | 64 | 65-127 | 128-511 | 512-1023 |
1024-10240 }] [ u/v{rg { absolute | delta} ] [ tkukpi/vjtgujqnf r-hold ]
[ tkukpi/gxgpv/kpfgz r-event] [ hcnnkpi/vjtgujqnf" f-hold] [ hcnnkpi/gxgpv/kpfgz
f-event] [ c/v{rg {rise | fall | all} ] [ qypgt owner-name ] [ kpvgtxcn"interval]
pq"toqp"cncto"index
Rctcogvgt"
index —— The index number of the Alarm Management entry, ranging from 1
to 12, in the format of 1-3,5.
To Next Page
Loading...
