TP-Link TL-SL5428E - show ipv6 mld snooping interface; show ipv6 mld snooping interface filter

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
263
The ujqy " krx8" onf" upqqrkpi" hknvgt command is used to display the filter
entries.
U{pvcz"
ujqy"krx8"onf"upqqrkpi"hknvgt
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the filter entries:
VN/UN764:G*eqphki+%"ujqy"krx8"onf"upqqrkpi"hknvgt
ujqy"krx8"onf"upqqrkpi"kpvgthceg"
Fguetkrvkqp"
The ujqy" krx8" onf" upqqrkpi" kpvgthceg command is used to display the
interface information of MLD Snooping.
U{pvcz"
ujqy"krx8"onf"upqqrkpi"kpvgthceg"["ikicdkvGvjgtpgv"port ]
Rctcogvgt"
port —— Specify the port number.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display all of the interface information:
VN/UN764:G*eqphki+%"ujqy"krx8"onf"upqqrkpi"kpvgthceg
ujqy"krx8"onf"upqqrkpi"kpvgthceg"hknvgt"
Fguetkrvkqp"
The ujqy"krx8"onf"upqqrkpi"kpvgthceg"hknvgt command is used to display the
filter ids bounded to the interface.
U{pvcz"
ujqy"krx8"onf"upqqrkpi"kpvgthceg"hknvgt"]ikicdkvGvjgtpgv"port_
Rctcogvgt"
port —— Specify the port number.