TP-Link TL-SL5428E - mac address-table aging-time; mac address-table filtering

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
122
VN/UN764:G*eqphki+%pq"oce"cfftguu/vcdng"uvcvke"00:02:58:4f:6c:23
oce"cfftguu/vcdng"cikpi/vkog"
Fguetkrvkqp"
The"oce"cfftguu/vcdng"cikpi/vkog"command is used to configure aging time
for the dynamic address. To return to the default configuration, please use pq"
oce"cfftguu/vcdng"cikpi/vkog"command.
U{pvcz"
oce"cfftguu/vcdng"cikpi/vkog"aging-time
pq"oce"cfftguu/vcdng"cikpi/vkog"
Rctcogvgt"
aging-time —— The aging time for the dynamic address. The value of it can be
0 or ranges from 10 to 630 seconds. When 0 is entered, the Auto Aging function
is disabled. It is 300 by default.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Configure the aging time as 500 seconds:
VN/UN764:G*eqphki+%oce"cfftguu/vcdng"cikpi/vkog"500"
oce"cfftguu/vcdng"hknvgtkpi"
Fguetkrvkqp"
The"oce"cfftguu/vcdng"hknvgtkpi"command is used to add the filtering address
entry. To delete the corresponding entry, please use pq" oce" cfftguu/vcdng"
hknvgtkpi" command. The filtering address function is to forbid the undesired
package to be forwarded. The filtering address can be added or removed
manually, independent of the aging time.
U{pvcz"
oce"cfftguu/vcdng"hknvgtkpi"mac-addr xkf vid
pq"oce"cfftguu/vcdng"hknvgtkpi { [mac-addr] [xkf"vid] }
Rctcogvgt"
mac-addr —— The MAC address to be filtered.