TP-Link TL-SL5428E - show ip dhcp relay; show ip dhcp relay helper-address

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
324
Rctcogvgt"
remoteID —— Specify the remote ID, ranging from 1 to 63 characters.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Specify the remote ID as “TP-LINK”:
VN/UN764:G*eqphki+%"kr"fjer"tgnc{"kphqtocvkqp"tgoqvg/kf"TP-LINK"
ujqy"kr"fjer"tgnc{"
Fguetkrvkqp"
The ujqy" kr" fjer" tgnc{ command is used to display the global status and
Option 82 configuration of DHCP Relay.
U{pvcz"
ujqy"kr"fjer"tgnc{
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the configuration of DHCP Relay:
VN/UN764:G*eqphki+%"ujqy"kr"fjer"tgnc{"
ujqy"kr"fjer"tgnc{"jgnrgt/cfftguu"
Fguetkrvkqp"
The ujqy"kr"fjer" tgnc{" jgnrgt/cfftguu command is used to display the IP
address of the DHCP server.
U{pvcz"
ujqy"kr"fjer"tgnc{"jgnrgt/cfftguu
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the IP address of the DHCP server:
VN/UN764:G*eqphki+%"ujqy"kr"fjer"tgnc{"jgnrgt/cfftguu"