VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
270
Gzcorng"
Add Local User admin to Group group2, and configure the Security Model of the
user as v3, the Security Level of the group as authPriv, the Authentication Mode
of the user as MD5, the Authentication Password as 11111, the Privacy Mode as
DES, and the Privacy Password as 22222:
VN/UN764:G*eqphki+%upor/ugtxgt" wugt admin local group2 uoqfg v3 ungx
authPriv eoqfg MD5 eryf 11111 goqfg DES gryf 22222
upor/ugtxgt"eqoowpkv{"
Fguetkrvkqp"
The upor/ugtxgt eqoowpkv{ command is used to add Community. To delete
the corresponding Community, please use pq" upor/ugtxgt eqoowpkv{
command. SNMP v1 and SNMP v2c adopt community name authentication.
The community name can limit access to the SNMP agent from SNMP network
management station, functioning as a password.
U{pvcz"
upor/ugtxgt eqoowpkv{ name { read-only | read-write } mib-view
pq"upor/ugtxgt"eqoowpkv{ name
Rctcogvgt"
name —— Community Name, ranging from 1 to 16 characters.
read-only | read-write —— The access rights of the community, with
“read-only” and “read-write” options.
mib-view —— The MIB View for the community to access.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Add community public, and the community has read-write management right to
View viewDefault:
VN/UN764:G*eqphki+%upor/ugtxgt"eqoowpkv{"public read-write viewDefault"
To Next Page
Loading...
