VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
206
urcppkpi/vtgg"vkogt"
Fguetkrvkqp"
The urcppkpi/vtgg" vkogt command is used to configure forward-time,
hello-time and max-age of Spanning Tree. To return to the default configurations,
please use pq"urcppkpi/vtgg"vkogt"command.
U{pvcz"
urcppkpi/vtgg" vkogt" {" [hqtyctf/vkog forward-time] [jgnnq/vkog hello-time]
[ocz/cig max-age] }
pq"urcppkpi/vtgg"vkogt
Rctcogvgt"
forward-time —— Forward Delay, which is the time for the port to transit its
state after the network topology is changed. Forward Delay ranges from 4 to 30
in seconds and it is 15 by default. Otherwise, 2 * (Forward Delay - 1) >= Max
Age.
hello-time ——Hello Time, which is the interval to send BPDU packets, and
used to test the links. Hello Time ranges from 1 to 10 in seconds and it is 2 by
default. Otherwise, 2 * (Hello Time + 1) <= Max Age.
max-age —— The maximum time the switch can wait without receiving a
BPDU before attempting to reconfigure, ranging from 6 to 40 in seconds. By
default, it is 20.
Eqoocpf"Oqfg"
Global Configuration Mode"
Gzcorng"
Configure forward-time, hello-time and max-age for Spanning Tree as 16
seconds, 3 seconds and 22 seconds respectively:"
VN/UN764:G*eqphki+%urcppkpi/vtgg" vkogt" hqtyctf/vkog" 16 jgnnq/vkog 3"
ocz/cig 22
urcppkpi/vtgg"jqnf/eqwpv"
Fguetkrvkqp"
The urcppkpi/vtgg" jqnf/eqwpv command is used to configure the maximum
number of BPDU packets transmitted per Hello Time interval. To return to the
default configurations, please use pq"urcppkpi/vtgg"jqnf/eqwpv"command.
To Next Page
Loading...
