TP-Link TL-SL5428E - ipv6 mld snooping last-listener query-count; ipv6 mld snooping multicast-vlan

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
251
krx8"onf"upqqrkpi"ncuv/nkuvgpgt"swgt{/eqwpv"
Fguetkrvkqp"
The krx8"onf"upqqrkpi"ncuv/nkuvgpgt"swgt{/eqwpv command is used to specify
the numbers of Specific Query Message to be sent. The default value is 2. To
restore the default number, please use pq" krx8" onf" upqqrkpi" ncuv/nkuvgpgt"
swgt{/eqwpv command.
U{pvcz"
krx8"onf"upqqrkpi"ncuv/nkuvgpgt"swgt{/eqwpv"num
pq krx8"onf"upqqrkpi"ncuv/nkuvgpgt"swgt{/eqwpv
Rctcogvgt"
num —— Specify the numbers of Specific Query Message to be sent, ranging
from 1 to 7.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Specify the number of Specific Query Message to 3:
VN/UN764:G*eqphki+%"krx8"onf"upqqrkpi"ncuv/nkuvgpgt"swgt{/eqwpv"3"
krx8"onf"upqqrkpi"ownvkecuv/xncp"
Fguetkrvkqp"
The krx8" onf" upqqrkpi" ownvkecuv/xncp command is used to enable the
multicast VLAN function. To disable this function, please use pq" krx8" onf"
upqqrkpi"ownvkecuv/xncp command. By default it is disabled.
U{pvcz"
krx8"onf"upqqrkpi"ownvkecuv/xncp
pq krx8"onf"upqqrkpi"ownvkecuv/xncp
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable multicast VLAN:
VN/UN764:G*eqphki+%"krx8"onf"upqqrkpi"ownvkecuv/xncp"