TP-Link TL-SL5428E - user access-control ip-based; user access-control mac-based

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
64
VN/UN764:G*eqphki+%wugt" pcog" tplink rcuuyqtf password"v{rg admin
uvcvwu enable
wugt"ceeguu/eqpvtqn"kr/dcugf"
Fguetkrvkqp"
The wugt"ceeguu/eqpvtqn" kr/dcugf" command is used to limit the IP-range of
the users for login. Only the users within the IP-range you set here are allowed
to login. To cancel the user access limit, please use pq wugt" ceeguu/eqpvtqn
command.
U{pvcz"
wugt"ceeguu/eqpvtqn kr/dcugf ip-addr ip-mask
pq"wugt"ceeguu/eqpvtqn
Rctcogvgt"
ip-addr —— The source IP address. Only the users within the IP-range you set
here are allowed to login.
ip-mask ——The subnet mask of the IP address.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Configure that only the user with the IP address 192.168.0.148 is allowed to
login:
VN/UN764:G*eqphki+%wug t"ceeguu/eqpvtqn"kr/dcugf"192.168.0.148 255.255.255.255
wugt"ceeguu/eqpvtqn"oce/dcugf"
Fguetkrvkqp"
The wugt" ceeguu/eqpvtqn" oce/dcugf" command is used to limit the MAC
address of the users for login. Only the user with this MAC address you set here
is allowed to login. To cancel the user access limit, please use pq" wugt"
ceeguu/eqpvtqn"command.