TP-Link TL-SL5428E - protocol-vlan vlan; protocol-vlan

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
35
rtqvqeqn/xncp"xncp"
Fguetkrvkqp"
The rtqvqeqn/xncp" xncp command is used to create a Protocol-based VLAN
entry. To delete a Protocol-based VLAN entry, please use pq" rtqvqeqn/xncp
xncp command.
U{pvcz"
rtqvqeqn/xncp"xncp"vlan-id vgorncvg"template-idx
pq"rtqvqeqn/xncp"xncp group-idx
Rctcogvgt"
vlan-id —— Specify IEEE 802.1Q VLAN ID, ranging from 1-4094.
template-idx ——The number of the Protocol-based VLAN Template. You can
get the template corresponding to the number by the" ujqy" rtqvqeqn/xncp"
vgorncvg command.
group-idx ——The number of the Protocol-based VLAN entry. You can get the
Protocol-based VLAN entry corresponding to the number by the" ujqy"
rtqvqeqn/xncp"xncp"command.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Create Protocol-based VLAN 2 and bind it with Protocol-based VLAN Template 3:
VN/UN764:G*eqphki+%rtqvqeqn/xncp"xncp"2 vgorncvg 3"
rtqvqeqn/xncp"
Fguetkrvkqp"
The rtqvqeqn/xncp" command is used to" enable the Protocol-based VLAN
feature for a specified port. To disable the Protocol-based VLAN feature of this
port, please use pq" rtqvqeqn/xncp command." By default, the Protocol-based
VLAN feature of all ports is disabled.