VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
20
Ejcrvgt"4" Wugt"Kpvgthceg"
gpcdng"
Fguetkrvkqp"
The gpcdng command is used to access Privileged EXEC Mode from User
EXEC Mode.
U{pvcz"
gpcdng"
Eqoocpf"Oqfg"
User EXEC Mode
Gzcorng"
If you have set the password to access Privileged EXEC Mode from User EXEC
Mode:
VN/UN764:G@gpcdng"
Gpvgt"rcuuyqtf："
VN/UN764:G%"
gpcdng"rcuuyqtf"
Fguetkrvkqp"
The" gpcdng" rcuuyqtf command is used to set the password for users to
access Privileged EXEC Mode from User EXEC Mode. To return to the default
configuration, please use pq"gpcdng"rcuuyqtf command.
U{pvcz"
gpcdng"rcuuyqtf"password [ugetgv {simple | cipher} ]
pq"gpcdng"rcuuyqtf"
Rctcogvgt"
password —— super password ， which contains 31 characters at most,
composing digits, English letters and underdashes only. By default, it is empty.
simple | cipher —— The way of displaying password in configuration file. By
default, it is “cipher”.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Set the super password as “admin” to access Privileged EXEC Mode from User
EXEC Mode:
To Next Page
Loading...
