VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
59
rqtv/ejcppgn"nqcf/dcncpeg"
Fguetkrvkqp"
The"rqtv/ejcppgn"nqcf/dcncpeg"command is used to configure the Aggregate
Arithmetic for LAG. To return to the default configurations, please use"pq"
rqtv/ejcppgn"nqcf/dcncpeg command.
U{pvcz"
rqtv/ejcppgn"nqcf/dcncpeg {src-dst-mac | src-dst-ip}
pq"rqtv/ejcppgn"nqcf/dcncpeg
Rctcogvgt"
src-dst-mac —— The source and destination MAC address. When this option
is selected, the Aggregate Arithmetic will be based on the source and
destination MAC addresses of the packets. The Aggregate Arithmetic for LAG is
“src-dst-mac” by default.
src-dst-ip —— The source and destination IP address. When this option is
selected, the Aggregate Arithmetic will be based on the source and destination
IP addresses of the packets.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Configure the Aggregate Arithmetic for LAG as “src-dst-mac”:
VN/UN764:G*eqphki+%rqtv/ejcppgn"nqcf/dcncpeg src-dst-mac
ncer"u{uvgo/rtkqtkv{"
Fguetkrvkqp"
The"ncer"u{uvgo/rtkqtkv{"command is used to configure the LACP system
priority globally. To return to the default configurations, please use"pq"ncer"
u{uvgo/rtkqtkv{ command.
U{pvcz"
ncer"u{uvgo/rtkqtkv{ pri
pq"ncer"u{uvgo/rtkqtkv{
Rctcogvgt"
pri —— The system priority, ranging from 0 to 65535. It is 32768 by default.
To Next Page
Loading...
