VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
268
smode —— Security Model, with v1、v2c and v3 options. They represent
SNMP v1, SNMP v2c and SNMP v3.
slev —— The Security Level of SNMP v3 Group. There are three options,
including noAuthNoPriv（no authorization and no encryption）、authNoPriv
（authorization and no encryption） and authPriv（authorization and encryption）.
By default, the Security Level is noAuthNoPriv. There is no need to configure
this in SNMP v1 Model and SNMP v2c Model.
read —— Read-only view. The management access is restricted to read-only,
and changes cannot be made to the assigned SNMP View.
write —— Write-only view. The management access is writing only and
changes can be made to the assigned SNMP View. The View defined both as
the Read View and the Write View can be read and modified.
notify —— Notify view. The management station software can receive trap
messages of the assigned SNMP view generated by the Switch's SNMP agent.
Eqoocpf"Oqfg"
Global Configuration mode
Gzcorng"
Add group 1, and configure the Security Model as SNMP v3, the security level
as authNoPriv, the management access to the assigned View viewDefault as
read-write, besides the trap messages sent by View viewDefault can be
received by Management station:
VN/UN764:G*eqphki+%upor/ugtxgt"itqwr group1 uoqfg v3 ungx authNoPriv
tgcf viewDefault ytkvg viewDefault pqvkh{ viewDefault
Delete Group group 1:
VN/UN764:G*eqph ki+%pq"upor/ugtxgt" itqwr"group1"uoqfg"v3"ungx"authNoPriv"
upor/ugtxgt"wugt"
Fguetkrvkqp"
The upor/ugtxgt" wugt command is used to add User. To delete the
corresponding User, please use pq"upor/ugtxgt"wugt command. The User in
an SNMP Group can manage the switch via the management station software.
The User and its Group have the same security level and access right.
To Next Page
Loading...
