VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
52
Gzcorng"
Configure host type Fast Ethernet port 3 as a member of primary VLAN 3 and
secondary VLAN 4:
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/3
VN/UN764:G*eqphki/kh+%uykvejrqtv"rtkxcvg/xncp"jquv/cuuqekcvkqp"3 4"
uykvejrqtv"rtkxcvg/xncp"ocrrkpi"
Fguetkrvkqp"
The uykvejrqtv"rtkxcvg/xncp"ocrrkpi"command is used to add promiscuous
type port to private VLAN. To remove the port from Private VLAN, please use pq"
uykvejrqtv"rtkxcvg/xncp"ocrrkpi command.
U{pvcz"
uykvejrqtv"rtkxcvg/xncp"ocrrkpi primary_vlan_id secondary_vlan_id
pq"uykvejrqtv"rtkxcvg/xncp"ocrrkpi primary_vlan_id secondary_vlan_id
Rctcogvgt"
primary-vlan-id —— Primary VLAN ID, ranging from 2 to 4094.
secondary-vlan-id —— Secondary VLAN ID, ranging from 2 to 4094.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Configure promiscuous type Fast Ethernet port 3 as a member of primary VLAN
3 and secondary VLAN 4:
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/3
VN/UN764:G*eqphki/kh+%uykvejrqtv"rtkxcvg/xncp"ocrrkpi"3 4"
To Next Page
Loading...
