VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
10
4. Type gpcdng command to enter Privileged EXEC Mode.
Figure 1-11 Enter into the Privileged EXEC Mode
Now you can manage your switch with CLI commands through Telnet connection.
Pqvg<"
You can refer to Ejcrvgt"33"Wugt"Ocpcigogpv"Eqoocpfu for detailed commands information
of the Telnet connection configuration.
30305" Nqiqp"d{"UUJ"
To log on by SSH, a Putty client software is recommended. There are two authentication modes to
set up an SSH connection:
Rcuuyqtf"Cwvjgpvkecvkqp"Oqfg:"It requires username and password, which are both cfokp"by
default.
Mg{"Cwvjgpvkecvkqp"Oqfg:"It requires a public key for the switch and a private key for the SSH
client software. You can generate the public key and the private key through Putty Key Generator.
Pqvg<"
Before SSH login, please follow the steps shown in Figure 1-12 to enable the SSH function
through Telnet connection.
Figure 1-12 Enable SSH function
To Next Page
Loading...
