VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
9
Figure 1-8 Run Window
2. Type"vgnpgv"3;4038:0203"in the command prompt"shown as 错误！未找到引用源。, and press
the Gpvgt button.
Figure 1-9 Connecting to the Switch
3. You are prompted to enter the connection password 678 you have set through Console port
connection, and then you are in User EXEC Mode.
Figure 1-10 Enter into the User EXEC Mode
To Next Page
Loading...
