VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
267
Rctcogvgt"
name —— The entry name of View, ranging from 1 to 16 characters. Each
View can include several entries with the same name.
mib-oid —— MIB Object ID. It is the Object Identifier (OID) for the entry of View,
ranging from 1 to 61 characters.
include | exclude —— View Type, with “include” and “exclude” options. They
represent the view entry can/cannot be managed by the SNMP management
station individually.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Add a View named view1, configuring the OID as 1.3.6.1.6.3.20, and this OID
can be managed by the SNMP management station:
VN/UN764:G*eqphki+%upor/ugtxgt"xkgy"view1 1.3.6.1.6.3.20 include"
upor/ugtxgt"itqwr"
Fguetkrvkqp"
The"upor/ugtxgt"itqwr command is used to manage and configure the SNMP
group. To delete the corresponding SNMP group, please use pq"upor/ugtxgt"
itqwr command. SNMP v3 provides the VACM (View-based Access Control
Model) and USM (User-Based Security Model) mechanisms for authentication.
The users in the SNMP Group can manage the device via the Read View, Write
View and Notify View. And the authentication mode and the privacy mode
guarantee the high security for the communication between the management
station and the managed device.
U{pvcz"
upor/ugtxgt" itqwr name [uoqfg { v1 | v2c | v3 }] [ungx { noAuthNoPriv |
authNoPriv | authPriv }] [tgcf read-view] [ytkvg write-view] [pqvkh{ notify-view]
pq"upor/ugtxgt" itqwr" name uoqfg { v1 | v2c | v3 } ungx { noAuthNoPriv |
authNoPriv | authPriv }"
Rctcogvgt"
name ——The SNMP Group name, ranging from 1 to 16 characters. The Group
Name, Security Model and Security Level compose the identifier of the SNMP
Group. These three items of the Users in one group should be the same.
To Next Page
Loading...
