TP-Link TL-SL5428E - ip igmp snooping authentication; show ip igmp snooping

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
242
kr"kior"upqqrkpi"cwvjgpvkecvkqp"
Fguetkrvkqp"
The kr" kior" upqqrkpi" cwvjgpvkecvkqp" command is used to enable IGMP
Authentication for the desired port. To disable the IGMP Authentication function,
please use pq" kr" kior"upqqrkpi" cwvjgpvkecvkqp" command. By default, it is
disabled.
U{pvcz"
kr"kior"upqqrkpi"cwvjgpvkecvkqp"
pq"kr"kior"upqqrkpi"cwvjgpvkecvkqp"
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Wugt"Iwkfgnkpgu"
The IGMP Authentication feature will take effect only when AAA function is
enabled and the RADIUS server is configured. For how to enable AAA function
and configure RADIUS server, please refer to aaa enable
and radius-server
host.
Gzcorng"
Enable the IGMP Authentication of port 1:
VN/UN764:G*eqphki+%"kpvgthceg"hcuvGvjgtpgv"1/0/1"
VN/UN764:G*eqphki/kh+%"kr"kior"upqqrkpi"cwvjgpvkecvkqp
ujqy"kr"kior"upqqrkpi"
Fguetkrvkqp"
The ujqy" kr" kior" upqqrkpi" command is used to display the global
configuration of IGMP Snooping.
U{pvcz"
ujqy"kr"kior"upqqrkpi"
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the global configuration of IGMP Snooping: