TP-Link TL-SL5428E - ethernet-oam link-monitor symbol-period

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
216
U{pvcz"
gvjgtpgv/qco"oqfg { passive | active"}
pq"gvjgtpgv/qco"oqfg
Rctcogvgt"
passive —— Specify the OAM mode as passive.
active ——Specify the OAM mode as active.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Configure Ethernet OAM client to operate in passive mode for Fast Ethernet
port 2:
VN/UN764:G*eqphki+%"kpvgthceg"hcuvGvjgtpgv"1/0/2"
VN/UN764:G*eqphki/kh+%gvjgtpgv/qco"oqfg"passive"
gvjgtpgv/qco"nkpm/oqpkvqt"u{odqn/rgtkqf
Fguetkrvkqp"
The gvjgtpgv/qco nkpm/oqpkvqt"u{odqn/rgtkqf command is used to configure
the parameters about one of the link events, error symbol period event. To
return to the default configurations, please use pq"gvjgtpgv/qco"nkpm/oqpkvqt"
u{odqn/rgtkqf command.
U{pvcz"
gvjgtpgv/qco" nkpm/oqpkvqt" u{odqn/rgtkqf" { vjtgujqnf" threshold" | ykpfqy"
window""| pqvkh{ {"disable | enable }}
pq"gvjgtpgv/qco"nkpm/oqpkvqt"u{odqn/rgtkqf"{ threshold | window | notify"}
Rctcogvgt"
threshold —— Configure the error threshold for generating error symbol-period
event. The range is from 1 to 4294967295 and the default value is 1.
window —— Configure the error symbol-period event detection interval. The
range is from 10 to 600, in terms of 100 ms intervals. The default value is 10.