TP-Link TL-SL5428E - contact-info; ip management-vlan

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
134
eqpvcev/kphq"
Fguetkrvkqp"
The eqpvcev/kphq"command is used to configure the system contact information.
To clear the system contact information, please use"pq"eqpvcev/kphq"command.
U{pvcz"
eqpvcev/kphq"contact_info
pq"eqpvcev/kphq contact_info"
Rctcogvgt"
contact_info —— Contact Information. It consists of 32 characters at most. It is
www.tp-link.com by default.
Eqoocpf"Oqfg"
Global Configuration Mode"
Gzcorng"
Configure the system contact information as www.tp-link.com:
VN/UN764:G*eqphki+%eqpvcev-kphq"www.tp-link.com
kr"ocpcigogpv/xncp"
Fguetkrvkqp"
The" kr" ocpcigogpv/xncp" command is used to configure the management
VLAN, through which you can log on to the switch. By default the management
VLAN is VLAN1.
U{pvcz"
kr"ocpcigogpv/xncp"{vlan-id}
Rctcogvgt"
vlan-id —— VLAN ID, ranging from 1 to 4094.
Eqoocpf"Oqfg"
Global Configuration Mode"
Gzcorng"
Set the VLAN6 as management VLAN:
VN/UN764:G*eqphki+%"kr"ocpcigogpv/xncp"6"