TP-Link TL-SL5428E - ipv6 mld snooping querier vlan max-response-time

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
256
U{pvcz"
krx8"onf"upqqrkpi"swgtkgt"xncp"vlan-id"
pq"krx8"onf"upqqrkpi"swgtkgt"xncp"vlan-id"
Rctcogvgt"
vlan-id —— The VLAN that enables the MLD querier function, ranging from 1 to
4094.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable MLD Querier function on VLAN 2:
VN/UN764:G*eqphki+%"krx8"onf"upqqrkpi"swgtkgt"xncp 2
krx8"onf"upqqrkpi"swgtkgt"xncp"ocz/tgurqpug/vkog"
Fguetkrvkqp"
The"krx8"onf"upqqrkpi"swgtkgt"xncp"ocz/tgurqpug/vkog command is used to
specify the max response time of the Query message. The default value is 10
seconds. To restore the default value, please use pq" krx8" onf" upqqrkpi"
swgtkgt"xncp"ocz/tgurqpug/vkog command.
U{pvcz"
krx8"onf"upqqrkpi"swgtkgt"xncp"vlan-id ocz/tgurqpug/vkog"time"
pq"krx8"onf"upqqrkpi"swgtkgt"xncp"vlan-id ocz/tgurqpug/vkog"
Rctcogvgt"
vlan-id —— The VLAN that enables the MLD Querier function, ranging from 1 to
4094.
time —— Specify the time in seconds, ranging from 1 to 25.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Specify the max response time as 10s on VLAN 2:
VN/UN764:G*eqphki+%"krx8"onf"upqqrkpi"swgtkgt"xncp"2 ocz/tgurqpug/vkog"
10