TP-Link TL-SL5428E - ipv6 mld snooping multicast-vlan vlan-id; ipv6 mld snooping vlan

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
252
krx8"onf"upqqrkpi"ownvkecuv/xncp"xncp/kf"
Fguetkrvkqp"
The krx8" onf"upqqrkpi" ownvkecuv/xncp" xncp/kf command is used to specify
the multicast VLAN ID. The default multicast VLAN is VLAN1. To restore the
default VLAN, please use pq" krx8" onf" upqqrkpi" ownvkecuv/xncp" xncp/kf"
command.
U{pvcz"
krx8"onf"upqqrkpi"ownvkecuv/xncp"xncp/kf"vid
pq"krx8"onf"upqqrkpi"ownvkecuv/xncp"xncp/kf
Rctcogvgt"
vid —— The specified IEEE 802.1Q VLAN ID, ranging from 1 to 4094.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Specify multicast VLAN as VLAN 2:
VN/UN764:G*eqphki+%"krx8"onf"upqqrkpi"ownvkecuv/xncp"xncp/kf"2"
krx8"onf"upqqrkpi"xncp"
Fguetkrvkqp"
The krx8" onf" upqqrkpi" xncp command is used to enable MLD Snooping
function on a specified VLAN. To disable it, please use pq"krx8"onf"upqqrkpi"
xncp command.
U{pvcz"
krx8"onf"upqqrkpi"xncp"vlan-id
pq krx8"onf"upqqrkpi"xncp"vlan-id
Rctcogvgt"
vlan-id ——The specified VLAN ID to enable MLD Snooping function, ranging
from 1 to 4094.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable MLD Snooping function on VLAN 2:
VN/UN764:G*eqphki+%"krx8"onf"upqqrkpi"xncp"2"