TP-Link TL-SL5428E - ip dhcp snooping mac-verify; ip dhcp snooping limit rate

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
78
kr"fjer"upqqrkpi"oce/xgtkh{"
Fguetkrvkqp"
The kr"fjer"upqqrkpi"oce/xgtkh{ command is used to enable the MAC Verify
feature. To disable the MAC Verify feature, please use pq" kr"fjer"upqqrkpi"
oce/xgtkh{ command. There are two fields of the DHCP packet containing the
MAC address of the Host. The MAC Verify feature is to compare the two fields
and discard the packet if the two fields are different.
U{pvcz"
kr"fjer"upqqrkpi"oce/xgtkh{"
pq"kr"fjer"upqqrkpi"oce/xgtkh{"
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Enable the MAC Verify feature for the Fast Ethernet port 2:
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/2"
VN/UN764:G*eqphki/kh+%kr"fjer"upqqrkpi"oce/xgtkh{
kr"fjer"upqqrkpi"nkokv"tcvg"
Fguetkrvkqp"
The kr"fjer"upqqrkpi"nkokv"tcvg"command is used to enable the Flow Control
feature for the DHCP packets. The excessive DHCP packets will be discarded.
To restore to the default configuration, please use"pq"kr"fjer"upqqrkpi"nkokv"
tcvg command.
U{pvcz"
kr"fjer"upqqrkpi"nkokv"tcvg"value
pq"kr"fjer"upqqrkpi"nkokv"tcvg"
Rctcogvgt"
value —— The value of Flow Control. The options are 0/5/10/15/20/25/30
(packet/second). The default value is 0, which stands for “disable”.