TP-Link TL-SL5428E - show qos cos-map; show qos dscp-map

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
169
U{pvcz"
ujqy" squ" kpvgthceg" [ hcuvGvjgtpgv port" | ikicdkvGvjgtpgv port |"tcpig
hcuvGvjgtpgv port-list |"tcpig"ikicdkvGvjgtpgv port-list ] "
Rctcogvgt"
port —— The Fast/Gigabit Ethernet port number.
port-list —— The list of Ethernet ports.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the configuration of QoS for Fast Ethernet port 5:
VN/UN764:G%ujqy squ"kpvgthceg"hcuvGvjgtpgv"1/0/5"
Display the configuration of QoS for Fast Ethernet ports 7 to 16:
VN/UN764:G%ujqy squ"kpvgthceg"tcpig"hcuvGvjgtpgv"1/0/7-16"
ujqy"squ"equ/ocr"
Fguetkrvkqp"
The ujqy" squ" equ/ocr command is used to display the configuration of
IEEE802.1P Priority and the mapping relation between cos-id and tc-id.
U{pvcz"
ujqy"squ"equ/ocr"
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the configuration of IEEE 802.1P Priority and the mapping relation
between cos-id and tc-id:
VN/UN764:G%ujqy squ"equ/ocr"
ujqy"squ"fuer/ocr"
Fguetkrvkqp"
The ujqy" squ" fuer/ocr command is used to display the configuration of
DSCP Priority.