VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
291
nnfr"vnx/ugngev"
Fguetkrvkqp"
The nnfr" vnx/ugngev command is used to configure TLVs to be included in
outgoing LLDPDU. To exclude TLVs, please use pq"nnfr"vnx/ugngev command.
By default, All TLVs are included in outgoing LLDPDU.
U{pvcz"
nnfr" vnx/ugngev" [port-description | system-capability | system-description |
system-name | management-address | port-vlan | protocol-vlan | vlan-name |
link-aggregation | mac-phy-cfg | max-frame-size | power | all]
pq" nnfr" vnx/ugngev [port-description | system-capability | system-description |
system-name | management-address | port-vlan | protocol-vlan | vlan-name |
link-aggregation | mac-phy-cfg | max-frame-size | power | all]
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Exclude “management-address” and “port-vlan-id” TLVs in LLDPDU outgoing
from Fast Ethernet port 1:
VN/UN764:G*eqphki+%"kpvgthceg"hcuvGvjgtpgv"1/0/1"
VN/UN764:G*eqphki/kh+%"pq"nnfr"vnx/ugngev"management-address port-vlan
ujqy"nnfr" "
Fguetkrvkqp"
The ujqy"nnfr command is used to display the global configuration of LLDP.
U{pvcz"
ujqy"nnfr" "
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the global configuration of LLDP:
To Next Page
Loading...
