VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
39
Rctcogvgt"
num —— The value of Global TPID. It must be 4 Hex integers. By default, it is
8100.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Configure Global TPID of the VLAN-VPN as 0x9100:
VN/UN764:G*eqphki+%fqv3s/vwppgn"vrkf 9100
fqv3s/vwppgn"ocrrkpi
Fguetkrvkqp"
The fqv3s/vwppgn"ocrrkpi"command is used to add the VLAN Mapping entry.
To delete the VLAN Mapping entry, please use the pq"fqv3s/vwppgn"ocrrkpi"
command.
U{pvcz"
fqv3s/vwppgn"ocrrkpi c-vlan sp-vlan [descript]
pq"fqv3s/vwppgn"ocrrkpi c-vlan
Rctcogvgt"
c-vlan —— Customer VLAN ID, ranging from 1 to 4094.
sp-vlan —— Service Provider VLAN ID, ranging from 1 to 4094.
descript —— Give a description to the VLAN Mapping entry, which contains 15
characters at most.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Add a VLAN Mapping entry named “TP” with the C-VLAN being 2 and the
SP-VLAN being 10:
VN/UN764:G*eqphki+%fqv3s/vwppgn"ocrrkpi"2"10"TP"
To Next Page
Loading...
