VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
315
Rctcogvgt"
method-list —— Specify the login method list on the console port. It is “default”
by default, which contains the method “local”.
Eqoocpf"Oqfg"
Line Configuration Mode
Gzcorng"
Configure the login authentication method list on the console port as “list1”:
VN/UN764:G*eqphki+%"nkpg"eqpuqng 0
VN/UN764:G*eqphki/nkpg+%"nqikp"cwvjgpvkecvkqp"list1
gpcdng"cwvjgpvkecvkqp*eqpuqng+"
Fguetkrvkqp"
The" gpcdng" cwvjgpvkecvkqp command is used to apply the privilege
authentication method list to the console port. To restore to the default
authentication method list, please use the pq"gpcdng"cwvjgpvkecvkqp"command.
U{pvcz"
gpcdng"cwvjgpvkecvkqp"{ method-list }
pq"gpcdng"cwvjgpvkecvkqp
Rctcogvgt"
method-list —— Specify the enable method list on the console port. It is
“default” by default, which contains the method “none”.
Eqoocpf"Oqfg"
Line Configuration Mode
Gzcorng"
Configure the enable authentication method list on the console port as “list2”:
VN/UN764:G*eqphki+%"nkpg"eqpuqng 0
VN/UN764:G*eqphki/nkpg+%"gpcdng"cwvjgpvkecvkqp"list2
To Next Page
Loading...
