VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
310
VN/UN764:G*eqphki+%"ujqy"ccc"itqwr
ccc"cwvjgpvkecvkqp"nqikp"
Fguetkrvkqp"
This ccc" cwvjgpvkecvkqp" nqikp" command is used to configure a login
authentication method list. A method list describes the authentication methods
and their sequence to authenticate a user. To delete the specified authentication
method list, please use the pq"ccc"cwvjgpvkecvkqp"nqikp"command.
U{pvcz"
ccc"cwvjgpvkecvkqp"nqikp"{ method-list } { method1 } [ method2 ] [ method3 ]
[ method4 ]
pq"ccc"cwvjgpvkecvkqp"nqikp"method-list
Rctcogvgt"
method-list —— Specify the method list name.
method1, method2, method3, method4 —— Specify the authentication methods
in order. The next authentication method is tried only if the previous method
does not respond, not if it fails.
The preset methods include radius, tacacs, local and none. “radius” means the
RADIUS server group “radius”; “tacacs” means the RACACS+ server group
“tacacs”; “local” means local username database are used; “none” means no
authentication is used for login.
Users can aslo define new method with the aaa group
command.
Eqoocpf"Oqfg"
Global Configuration Mode
Wugt"Iwkfgnkpgu"
By default the login authentication method list is “default” with “local” as
method1.
Gzcorng"
Configure a login authentication method list “list1” with the priority1 method as
radius and priority2 method as local:
VN/UN764:G*eqphki+%"ccc"cwvjgpvkeckvqp"nqikp"list1 radius local
To Next Page
Loading...
