TP-Link TL-SL5428E - show ip igmp snooping filter

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
245
dynamic—— Display dynamic multicast groups.
dynamic count—— The numbers of all dynamic multicast groups.
static—— Display static multicast groups.
static count—— The numbers of all static multicast groups.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the information of all IGMP snooping groups:
VN/UN764:G%ujqy"kr"kior"upqqrkpi"itqwru
Display all the multicast entries in VLAN 5:
VN/UN764:G*eqphki+%ujqy"kr"kior"upqqrkpi"itqwru"xncp"5
Display the count of multicast entries in VLAN 5:
VN/UN764:G*eqphki+%ujqy"kr"kior"upqqrkpi"itqwru"xncp"5 count
ujqy"kr"kior"upqqrkpi"hknvgt"
Fguetkrvkqp"
The ujqy"kr"kior"upqqrkpi"hknvgt command is used to display the Multicast
Filter Address table.
U{pvcz"
ujqy"kr"kior"upqqrkpi"hknvgt [filter-addr-id-list]
Rctcogvgt"
filter-addr-id-list ——The multicast ID selected to display the multicast filter
address information. It is optional.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display all the multicast filter address information:
VN/UN764:G*eqphki+%ujqy"kr"kior"upqqrkpi"hknvgt