TP-Link TL-SL5428E - Chapter 30 MSTP Commands; spanning-tree(global); spanning-tree(interface)

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
198
Ejcrvgt"52" OUVR"Eqoocpfu"
MSTP (Multiple Spanning Tree Protocol), compatible with both STP and RSTP and subject to
IEEE 802.1s, can disbranch a ring network. STP is to block redundant links and backup links as
well as optimize paths.
urcppkpi/vtgg*inqdcn+"
Fguetkrvkqp"
The urcppkpi/vtgg" command is used to enable STP function globally. To
disable the STP function, please use pq"urcppkpi/vtgg command.
U{pvcz"
urcppkpi/vtgg
pq"urcppkpi/vtgg" "
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable the STP function:
VN/UN764:G*eqphki+%urcppkpi/vtgg"
urcppkpi/vtgg*kpvgthceg+"
Fguetkrvkqp"
The urcppkpi/vtgg" command is used to enable STP function for a port. To
disable the STP function, please use pq"urcppkpi/vtgg command.
U{pvcz"
urcppkpi/vtgg
pq"urcppkpi/vtgg" "
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Enable the STP function for Fast Ethernet port 2: