VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
235
the format of 1/0/2; Gigabit Ethernet port, ranging from 1-4, in the format of
1/0/2.
vlan-id —— The VLAN ID of the multicast IP, ranging from 1 to 4094.
ip —— The static multicast IP address.
port-list —— The forward port list of the multicast group.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable the IGMP Snooping function and modify Member Port Time as 200
seconds for VLAN1-3:
VN/UN764:G*eqphki+%kr"kior"upqqrkpi"xncp/eqphki"1-3 ovkog"200
kr"kior"upqqrkpi"ownvk/xncp/eqphki"
Fguetkrvkqp"
The" k r" kior" upqqrkpi" ownvk/xncp/eqphki" command is used to create and
configure a Multicast VLAN. To delete the corresponding Multicast VLAN,
please use pq"kr"kior"upqqrkpi"ownvk/xncp/eqphki command.
U{pvcz"
kr" kior" upqqrkpi" ownvk/xncp/eqphki [vlan-id] { tvkog" router-time | ovkog"
member-time | nvkog" leave-time | trqtv" kpvgthceg" { hcuvGvjgtpgv port |
ikicdkvGvjgtpgv port } }
pq"kr"kior"upqqrkpi"ownvk/xncp/eqphki"
Rctcogvgt"
vlan-id —— The ID of the VLAN desired to modify configuration, ranging from 2
to 4094.
router-time —— Router Port Time. Within this time, if the switch does not
receive IGMP query message from the router port, it will consider this port is not
a router port any more. Router Port Time ranges from 60 to 600 in seconds. By
default, it is 300.
member-time —— Member Port Time. Within this time, if the switch does not
receive IGMP report message from the member port, it will consider this port is
not a member port any more. Member Port Time ranges from 60 to 600 in
seconds. By default, it is 260.
To Next Page
Loading...
