TP-Link TL-SL5428E - show ipv6 mld snooping static-mcast; show ipv6 mld snooping group; show ipv6 mld snooping filter

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
262
ujqy"krx8"onf"upqqrkpi"uvcvke/oecuv"
Fguetkrvkqp"
The ujqy"krx8"onf" upqqrkpi"uvcvke/oecuv command is used to display the
static multicast groups configured by users.
U{pvcz"
ujqy"krx8"onf"upqqrkpi"uvcvke/oecuv
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display static multicast groups:
VN/UN764:G*eqphki+%"ujqy"krx8"onf"upqqrkpi"uvcvke/oecuv"
ujqy"krx8"onf"upqqrkpi"itqwr"
Fguetkrvkqp"
The ujqy" krx8" onf" upqqrkpi" itqwr command is used to display multicast
groups.
U{pvcz"
ujqy"krx8"onf"upqqrkpi"itqwr"[ dynamic | static ]["xncp"vlan-id ]
Rctcogvgt"
dynamic"—— Display dynamic groups.
static —— Display static groups.
vlan-id ——The VLAN ID selected to display, ranging from 1 to 4094.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display all of the multicast groups:
VN/UN764:G*eqphki+%"ujqy"krx8"onf"upqqrkpi"itqwr
ujqy"krx8"onf"upqqrkpi"hknvgt"
Fguetkrvkqp"