TP-Link TL-SL5428E - show protocol-vlan template; show protocol-vlan vlan

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
36
U{pvcz"
rtqvqeqn/xncp"
pq"rtqvqeqn/xncp
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Enable the Protocol-based VLAN feature for the Gigabit Ethernet port 25:
VN/UN764:G*eqphki+%kpvgthceg"ikicdkvGvjgtpgv"1/0/25
VN/UN764:G*eqphki/kh+%rtqvqeqn/xncp"
ujqy"rtqvqeqn/xncp"vgorncvg"
Fguetkrvkqp"
The ujqy"rtqvqeqn/xncp"vgorncvg command is used to display the information
of the Protocol-based VLAN templates.
U{pvcz"
ujqy"rtqvqeqn/xncp"vgorncvg
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the information of the Protocol-based VLAN templates:
VN/UN764:G*eqphki+%ujqy"rtqvqeqn/xncp"vgorncvg"
ujqy"rtqvqeqn/xncp"xncp"
Fguetkrvkqp"
The ujqy" rtqvqeqn/xncp" xncp command is used to display the information
about Protocol-based VLAN entry.