TP-Link TL-SL5428E - ip dhcp snooping information remote-id; ip dhcp snooping information circuit-id

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
76
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/2"
VN/UN764:G*eqphki/kh+%kr"fjer"upqqrkpi"kphqtocvkqp"uvtcvgi{"replace
kr"fjer"upqqrkpi"kphqtocvkqp"tgoqvg/kf"
Fguetkrvkqp"
The"kr"fjer"upqqrkpi"kphqtocvkqp"tgoqvg/kf"command is used to enable and
configure the customized sub-option Remote ID for the Option 82. To return to
default Remote ID for the Option 82, please use pq kr" fjer" upqqrkpi"
kphqtocvkqp"tgoqvg/kf"command.
U{pvcz"
kr"fjer"upqqrkpi"kphqtocvkqp"tgoqvg/kf string
pq kr"fjer"upqqrkpi"kphqtocvkqp"tgoqvg/kf"
Rctcogvgt"
string —— Enter the sub-option Remote ID, which contains 32 characters at
most.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
For port 2, enable and configure the customized sub-option Remote ID for the
Option 82 as tplink:
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/2"
VN/UN764:G*eqphki/kh+%kr"fjer"upqqrkpi"kphqtocvkqp"tgoqvg/kf"tplink
kr"fjer"upqqrkpi"kphqtocvkqp"ektewkv/kf"
Fguetkrvkqp"
The kr"fjer"upqqrkpi"kphqtocvkqp"ektewkv/kf command is used to enable and
configure the customized sub-option Circuit ID for the Option 82. To return to the
default Circuit ID for the Option 82, please use pq kr" fjer" upqqrkpi"
kphqtocvkqp"ektewkv/kf command.