VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
96
U{pvcz"
fqv3z"iwguv/xncp vid
pq"fqv3z"iwguv/xncp"
Rctcogvgt"
vid —— The VLAN ID needed to enable the Guest VLAN function, ranging from
2 to 4094.
"The supplicants in the Guest VLAN can access the specified network
source.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable the Guest VLAN function for VLAN 5:
VN/UN764:G*eqphki+%fqv3z"iwguv/xncp"5"
fqv3z"ceeqwpvkpi"
Fguetkrvkqp"
The fqv3z" ceeqwpvkpi command is used to enable the IEEE 802.1X
accounting function globally. To disable the IEEE 802.1X accounting function,
please use pq"fqv3z"ceeqwpvkpi command.
U{pvcz"
fqv3z"ceeqwpvkpi
pq"fqv3z"ceeqwpvkpi"
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable the 802.1X accounting function globally:
VN/UN764:G*eqphki+%"fqv3z"ceeqwpvkpi"
To Next Page
Loading...
