TP-Link TL-SL5428E - lldp snmp-trap

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
290
U{pvcz"
nnfr"vtcpuokv"
pq"nnfr"vtcpuokv"
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Enable Fast Ethernet port 1 to transmit LLDPDU:
VN/UN764:G*eqphki+%"kpvgthceg"hcuvGvjgtpgv"1/0/1
VN/UN764:G*eqphki/kh+%nnfr"vtcpuokv"
nnfr"upor/vtcr"
Fguetkrvkqp"
The nnfr"upor/vtcr command is used to enable the port’s SNMP notification. If
enabled, the port will notify the trap event to network management system. To
disable the ports' SNMP notification, please use pq"nnfr"upor/vtcr command.
U{pvcz"
nnfr"upor/vtcr"
pq"nnfr"upor/vtcr
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Enable the SNMP notification for Fast Ethernet port 1:
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/1
VN/UN764:G*eqphki/kh+%nnfr"upor/vtcr