VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
208
urcppkpi/vtgg"drfwhknvgt"
Fguetkrvkqp"
The urcppkpi/vtgg" drfwhknvgt" command is used to enable the BPDU filter
function for a port. With the function enabled, the port can be prevented from
receiving and sending any BPDU packets. To disable the BPDU filter function,
please use pq"urcppkpi/vtgg"drfwhknvgt command.
U{pvcz"
urcppkpi/vtgg"drfwhknvgt
pq"urcppkpi/vtgg"drfwhknvgt"
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Enable the BPDU filter function for Fast Ethernet port 2:
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/2"
VN/UN764:G*eqphki/kh+%urcppkpi/vtgg"drfwhknvgt"
urcppkpi/vtgg"drfwiwctf"
Fguetkrvkqp"
The urcppkpi/vtgg"drfwiwctf"command is used to enable the BPDU protect
function for a port. With the BPDU protect function enabled, the port will set itself
automatically as ERROR-PORT when it receives BPDU packets, and the port
will disable the forwarding function for a while. To disable the BPDU protect
function, please use pq"urcppkpi/vtgg"drfwiwctf command.
U{pvcz"
urcppkpi/vtgg"drfwiwctf
pq"urcppkpi/vtgg"drfwiwctf"
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Enable the BPDU protect function for Fast Ethernet port 2:
To Next Page
Loading...
