TP-Link TL-SL5428E - ethernet-oam remote-loopback; clear ethernet-oam statistics

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
222
gvjgtpgv/qco"tgoqvg/nqqrdcem"
Fguetkrvkqp"
The gvjgtpgv/qco"tgoqvg/nqqrdcem"command is used to request the remote
peer to start or stop the Ethernet OAM remote loopback mode.
U{pvcz"
gvjgtpgv/qco"tgoqvg/nqqrdcem"{ start | stop } "
Rctcogvgt"
start —— Request the remote peer to start the Ethernet OAM remote loopback
mode.
stop —— Request the remote peer to stop the Ethernet OAM remote loopback
mode.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Request the remote peer to start the Ethernet OAM remote loopback mode on
Fast Ethernet port 3:
VN/UN764:G*eqphki+%"kpvgthceg"hcuvGvjgtpgv"1/0/3"
VN/UN764:G*eqphki/kh+%"gvjgtpgv/qco"tgoqvg/nqqrdcem"start"
engct"gvjgtpgv/qco"uvcvkuvkeu"
Fguetkrvkqp"
The engct" gvjgtpgv/qco" uvcvkuvkeu" command is used to clear Ethernet OAM
statistics.
U{pvcz"
engct" gvjgtpgv/qco" uvcvkuvkeu" [" kpvgthceg" { hcuvGvjgtpgv" |" i kicdkvGvjgtpgv }
port"]