VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
309
ugtxgt"
Fguetkrvkqp"
This ugtxgt"command is used to add the existing server in the defined server
group. To remove the specified server from the server group, please use the pq"
ugtxgt"command.
U{pvcz"
ugtxgt"ip-address
pq"ugtxgt"ip-address
Rctcogvgt"
ip-address —— Specify the server’s IP address.
Eqoocpf"Oqfg"
Server Group Configuration Mode
Gzcorng"
Create the RADIUS server 1.1.1.1 to RADIUS server group “radius1”:
VN/UN764:G*eqphki+%"ccc"itqwr"radius radius1
VN/UN764:G*ccc/itqwr+%"ugtxgt"1.1.1.1
ujqy"ccc"itqwr"
Fguetkrvkqp"
This ujqy"ccc"itqwr"command is used to display the summary information of
the AAA groups. All the servers in this group will be listed if you specify the
group name.
U{pvcz"
ujqy"ccc"itqwr"[ group-name ]
Rctcogvgt"
group-name —— Specify the server group name.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the information of all the server groups:
To Next Page
Loading...
