VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
279
Rctcogvgt"
index —— The index number of the entry, ranging from 1 to 12, in the format of
1-3,5.
port —— The Fast/Gigabit Ethernet port number.
seconds —— The interval to take samplings from the port, ranging from 10 to
3600 in seconds. By default, it is 1800.
owner-name —— The owner of the history sample entry, ranging from 1 to 16
characters. By default, it is “monitor”.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Configure the sample port as 2 and the sample interval as 100 seconds for the
entry 1-3:
VN/UN764:G*eqphki+%toqp"jkuvqt{ 1-3 kpvgthceg"hcuvGvjgtpgv 1/0/2 kpvgtxcn"
100 qypgt owner1
toqp"gxgpv" "
Fguetkrvkqp"
The toqp" gxgpv command is used to configure the entries of SNMP-RMON
Event. To return to the default configuration, please use pq" toqp" gxgpv"
command. Event Group, as one of the commonly used RMON Groups, is used
to define RMON events. Alarms occur when an event is detected.
U{pvcz"
toqp"gxgpv index { [ wugt user-name ] [ fguetkrvkqp descript ] [ v{rg {none |
log | notify | log-notify } ] [qypgt owner-name] }
pq"toqp"gxgpv index
Rctcogvgt"
index —— The index number of the event entry, ranging from 1 to 12. You can
only select one entry for each command.
user-name —— The name of the User to which the event belongs, ranging
from 1 to 16 characters. By default, it is “public”.
descript —— The description of the event, ranging from 1 to 16 characters. By
default, it is empty.
To Next Page
Loading...
