VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
139
name —— Specify the name for the configuration file which would be
downloaded.
Eqoocpf"Oqfg"
Privileged EXEC Mode
Gzcorng"
Download the configuration file named as config to the switch from TFTP server
with the IP 192.168.0.148:
VN/UN764:G% eqr{" vhvr" uvctvwr/eqphki" kr/cfftguu" 192.168.0.148 hkngpcog
config
Download the configuration file named as config to the switch from TFTP server
with the IP fe80::1234
VN/UN764:G% eqr{"vhvr"uvctvwr/eqphki"kr/cfftguu"fe80::1234 hkngpcog config"
hktoyctg"writcfg"
Fguetkrvkqp"
The hktoyctg"writcfg"command is used to upgrade the switch system file via
the TFTP server.
U{pvcz"
hktoyctg"writcfg kr/cfftguu ip-addr hkngpcog"name
Rctcogvgt"
ip-addr —— IP address of the TFTP server. Both IPv4 and IPv6 addresses are
supported, for example 192.168.0.1 or fe80::1234.
name —— Specify the name for the firmware file.
Eqoocpf"Oqfg"
Privileged EXEC Mode
Gzcorng"
Upgrade the switch system file named as firmware.bin via the TFTP server with
the IP address 192.168.0.148:
VN/UN764:G%" hktoyctg" writcfg" kr/cfftguu" 192.168.0.148" hkngpcog"
firmware.bin
To Next Page
Loading...
