VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
82
Ejcrvgt"35" CTR"Kpurgevkqp"Eqoocpfu"
ARP (Address Resolution Protocol) Detect function is to protect the switch from the ARP cheating,
such as the Network Gateway Spoofing and Man-In-The-Middle Attack, etc.
kr"ctr"kpurgevkqp*inqdcn+"
Fguetkrvkqp"
The kr ctr"kpurgevkqp"command is used to enable the ARP Detection function
globally. To disable the ARP Detection function, please use pq"kr"ctr"fgvgevkqp
command.
U{pvcz"
kr"ctr"kpurgevkqp"
pq"kr"ctr"kpurgevkqp"
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable the ARP Detection function globally:
VN/UN764:G*eqphki+%kr"ctr"kpurgevkqp
kr"ctr"kpurgevkqp"vtwuv"
Fguetkrvkqp"
The kr"ctr"kpurgevkqp"vtwuv"command is used to configure the port for which
the ARP Detect function is unnecessary as the Trusted Port. To clear the
Trusted Port list, please use pq"kr"ctr"fgvgevkqp"vtwuv"command .The specific
ports, such as up-linked port, routing port and LAG port, should be set as
Trusted Port. To ensure the normal communication of the switch, please
configure the ARP Trusted Port before enabling the ARP Detect function.
U{pvcz"
kr"ctr"kpurgevkqp"vtwuv
pq"kr"ctr"kpurgevkqp"vtwuv"
To Next Page
Loading...
