TP-Link TL-SL5428E - Chapter 24 Ethernet Configuration Commands; interface fastEthernet; interface range fastEthernet

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
151
Ejcrvgt"46" Gvjgtpgv"Eqphkiwtcvkqp"Eqoocpfu"
Ethernet Configuration Commands can be used to configure the Bandwidth Control, Negotiation
Mode and Storm Control for Ethernet ports.
kpvgthceg"hcuvGvjgtpgv
Fguetkrvkqp"
The kpvgthceg" hcuvGvjgtpgv" command is used to enter the interface
fastEthernet Configuration Mode and configure the corresponding Fast Ethernet
port.
U{pvcz"
kpvgthceg"hcuvGvjgtpgv port
Rctcogvgt"
port —— The Fast/Gigabit Ethernet port number.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
To enter the Interface fastEthernet Configuration Mode and configure Fast
Ethernet port 2:
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/2"
kpvgthceg"tcpig"hcuvGvjgtpgv
Fguetkrvkqp"
The kpvgthceg" tcpig" hcuvGvjgtpgv" command is used to enter the interface
range fastEthernet Configuration Mode and configure multiple Fast Ethernet
ports at the same time.
U{pvcz"
kpvgthceg"tcpig"hcuvGvjgtpgv port-list
Rctcogvgt
port-list —— The list of Fast Ethernet ports.
Eqoocpf"Oqfg"
Global Configuration Mode